Short message
Error message
Recommended action
Hardware Fault
Hardware installed but reporting
fault
Contact Hewlett Packard
Enterprise Support.
Load order
Hardware install in wrong order
Move the card to the correct
location.
Hardware Missing
Hardware expected but not found Replace the card or use the
Remove Cards
option on the
Optional Hardware panel, and
restart the system.
Hardware degraded
Hardware installed but in
degraded state
Contact Hewlett Packard
Enterprise Support.
Empty Slot
Empty slot
Install the optional hardware and
try again.
Table 3: Error messages for licensing
Short message
Error message
Recommended action
Not Checked
Slot {x} could not be checked due
to other errors
Resolve the hardware issues and
try again.
No Hardware
Slot {x} does not contain any
optional hardware
Install the optional hardware and
try again.
Hardware Error
A hardware error is preventing a
license being applied to Slot {x}
Resolve the hardware issues and
try again.
Load Order
A license is available for Slot {x}
but the preceding slot in the load
order must be licensed first.
Install the correct licenses in
order.
Unlicensed
Slot {x} is unlicensed
Install the license.
Removing and replacing optional hardware cards
If you receive an error about the newly installed optional card that requires moving or replacing the card,
use the following procedure.
Procedure
1.
Log in to the StoreOnce Management Console.
2.
On the main menu, select
Settings
.
3.
In the
System
section, click the
License Management
panel.
4.
On the
License Management
screen, expand the
Actions
menu and select
Remove Cards
.
5.
To make the necessary changes, follow the steps in the chapter
.
You can reinstall cards in the same slot or different slots, as long as you follow the load order and
licensing rules.
Installing optional hardware
141
