HPE SN3000B Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 95

background image

SFP transceivers

Table 3: SFP transceiver options

Option

Part number

8Gb Transceivers

8Gb Shortwave B-series FC SFP+

8Gb LW B-series 10km FC SFP+

B-series 8Gb LW 25km FC SFP

10Gb Transceivers

B-series 10Gb SFP+ Short Range Transceiver

B-series 10Gb SFP+ Long Range Transceiver

16Gb Transceivers

B-series 16Gb SFP+ Short Wave Transceiver

16Gb Long Wave
Transceivers

16Gb Long Wave B-series 10km FC SFP+ 1 Pack

HPE SN3000B 16Gb FC Switch

This section provides an overview of the SN3000B 16Gb FC Switch. It describes platform capabilities and
components, the physical layout of the switch, and hardware and software options.

Overview

The SN3000B 16Gb FC Switch is a 24-port autosensing 4, 8, or 16 Gb/s FC switch that delivers the latest
Hewlett Packard Enterprise single-chip architecture for FC SANs. The SN3000B 16Gb FC Switch is a
small-sized to mid-sized business-class switch that is designed to handle smaller-scale SAN
requirements.

The SN3000B 16Gb FC Switch provides up to 24 ports in a single height (1U) switch, which enables the
creation of very dense fabrics in a relatively small space. This switch also offers POD licensing. Base
models of the switch contain 12 ports, and an additional 12-port POD license can be purchased.

NOTE:

The base model of the SN3000B 16Gb FC Switch includes a single power supply and fan module
assembly. An optional second power supply and fan module assembly can be added to the switch
as an upgrade, for redundancy and hot-swap capability.

The SN3000B 16Gb FC Switch supplies RAS performance and the scalability requirements of an
enterprise switch along with interoperability and ease-of-use advantages.

The SN3000B 16Gb FC Switch can be configured in AG mode, which enables configuring the enterprise
fabric to handle additional N_Ports instead of domains. Reducing the number of domain IDs and ports
simplifies configuration and management in a large fabric. Switches in AG mode are logically transparent
to the host and the fabric. You can increase the number of hosts that have access to the fabric without
increasing the number of switches.

Platform capabilities

The SN3000B 16Gb FC Switch offers the following features and capabilities:

16

SFP transceivers

«
...
14
15
16
17
18
...
»

Содержание SN3000B
































































































Отзывы:

Нет отзывов

Похожие инструкции для SN3000B

Бренд: D-Link Страницы: 36

Бренд: Dataprobe Страницы: 21

Бренд: Sams Страницы: 10

TM-1-8210 Series

Бренд: Eaton Страницы: 3

FlowPoint 2100 12

Бренд: Cabletron Systems Страницы: 36

Бренд: Hawking Страницы: 2

Бренд: G-Lab Страницы: 12

USB 2.0 7-Port Hub HO97916

Бренд: GE Страницы: 19

Бренд: HDTV Supply Страницы: 21

Бренд: Lindy Страницы: 54

Бренд: Opengear Страницы: 109

Бренд: MLis Страницы: 85

Ulusoy URING36 F-SF6

Бренд: Eaton Страницы: 14

SW-UNM-8FE1GC-8POE

Бренд: MO-EL Страницы: 9

Бренд: B+B SmartWorx Страницы: 2

Бренд: Lantech Страницы: 108

Бренд: Abus Страницы: 188

Бренд: Fujitsu Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды