HPE ProLiant ML10 Gen9, Руководство по техническому обслуживанию и ремонту

Страница: 33 / 76

Removal and replacement procedures 33
8.
Remove the drive from the optical disk drive cage.
To replace the component, reverse the removal procedure.
System fan
CAUTION: To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
To remove the component:
1.
Power down the server (on page 24 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Remove the access panel (on page 24 ).
4.
Remove the system fan:
a.
Disconnect the fan cable.
b.
Remove two screws from the rear panel.