HPE ProLiant e910, Руководство пользователя и по обслуживанию

Страница: 59 / 182

Managing the server power
The Virtual Power Button section on the Server Power page displays the current power state of the server, as well as options
for remotely controlling server power. System Power indicates the state of the server power when the page is first opened.
The server power state can be
ON, OFF, or Reset. Use the browser refresh feature to view the current server power state. The
server is rarely in the Reset state.
Prerequisites
Virtual Power and Reset privilege
Procedure
1. Click Power & Thermal in the navigation tree.
The page opens with the
Server Power tab selected.
2. Click one of the following buttons:
• Momentary Press
• Press and Hold
•
Reset
•
Cold Boot
The Press and Hold, Reset, and Cold Boot options are not available when the server is powered off.
3. When prompted to confirm the request, click OK.
Virtual power button options
• Momentary Press—The same as pressing the physical power button. If the server is powered off, a momentary press will
turn on the server power.
Some operating systems might be configured to initiate a graceful shutdown after a momentary press, or to ignore this
event. Hewlett Packard Enterprise recommends using system commands to complete a graceful operating system
shutdown before you attempt to shut down by using the virtual power button.
•
Press and Hold—The same as pressing the physical power button for 5 seconds and then releasing it.
The server is powered off as a result of this operation. Using this option might circumvent the graceful shutdown features
of the operating system.
This option provides the ACPI functionality that some operating systems implement. These operating systems behave
differently depending on a short press or long press.
• Reset—Forces the server to warm-boot: CPUs and I/O resources are reset. Using this option circumvents the graceful
shutdown features of the operating system.
•
Cold Boot—Immediately removes power from the server. Processors, memory, and I/O resources lose main power. The
server will restart after approximately 8 seconds. Using this option circumvents the graceful shutdown features of the
operating system.
iLO access settings
The default access settings values are suitable for most environments. The values you can modify on the Access Settings
page allow customization of the iLO external access methods for specialized environments.
Setting up iLO 59