manualshive.com logo in svg

HPE ProLiant DX170r Gen10, Руководство пользователя

Поделиться
Скачать
HPE ProLiant DX170r Gen10 Скачать руководство пользователя страница 20

CAUTION: 

To avoid damage to the server or server blank:

• Always support the bottom of the server or server blank when removing it from the chassis.

• Do not use the release lever to carry the server or server blank.

Procedure

1. Power down the server

 on page 19.

2.

Disconnect all peripheral cables from the server.

3.

Remove the server from the chassis:

a.

Loosen the release lever thumbscrew.

b.

Open the release lever.

c.

Use the release lever to pull the server out of the chassis.

Install the server into the chassis

CAUTION: 

To avoid damage to the server or server blank:

• Always support the bottom of the server or server blank when removing it from the chassis.

• Do not use the release lever to carry the server or server blank.

Procedure

1.

Slide the server into the chassis.

2.

Close the release lever.

3.

Tighten the release lever thumbscrew.

20

Operations

Содержание ProLiant DX170r Gen10





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды