Numerous configurations are possible. This section offers two possible configurations. For more
information, see
on page 89.
Accessing a server blade with local KVM
Prerequisites
For this configuration, a USB hub is not necessary. To connect additional devices, use a USB hub.
CAUTION:
Before disconnecting the SUV cable from the connector, always squeeze the release
buttons on the sides of the connector. Failure to do so can result in damage to the equipment.
Procedure
1.
Open the serial label pull tab and connect the c-Class Blade SUV Cable to the server blade.
2.
Connect the video connector to a monitor.
3.
Connect a USB mouse to one USB connector.
4.
Connect a USB keyboard to the second USB connector.
Item
Description
1
Monitor
2
USB mouse
3
USB keyboard
4
c-Class Blade SUV Cable
Accessing local media devices
Prerequisites
Use the following configuration when configuring a server blade or loading software updates and patches
from a USB CD/DVD-ROM.
Use a USB hub when connecting a USB CD-ROM drive to the server blade. The USB connectors on the
SUV cable do not support devices that require a power source greater than 500mA. The USB hub
Cabling
77
