Page 108
PoE Port Schedule
Configuring an Absolute Time Period
To configure an absolute schedule, select the schedule from the
Schedule
list and click
Add Abso-
lute
.
Figure 76. Add Absolute Time Period Page
Table 56. Add Absolute Time Period Fields
Click
Apply
to save any changes for the current boot session. The changes take effect immediately but
are not retained across a switch reset unless you click
Save Configuration
.
Field
Description
Schedule
The schedule to be configured.
Start Time
Select this option to configure values for the
Start Date
and the
Starting Time of Day
fields.
If this option is not selected, the entry becomes active immediately. It is not selected by
default.
Start Date
Click the calendar icon to select the day, month, and year when this entry becomes active.
This field can be configured only when the
Start Time
option is selected.
Starting Time of Day
Specify the time of day that the entry becomes active by entering the information in the field
or by using the scroll bar in the Choose Time window, which displays when you click the field.
You can click
Now
to use the current time of day. Click
Done
to close the window.
End Time
Select this option to configure values for the End Date and Ending Time of Day fields.
If this option is not selected, the entry does not have an end time; after the time period starts,
it will remain active indefinitely.
End Date
Click the calendar icon to select the day, month, and year when this entry should no longer
be active.
Ending Time of Day
Specify the time of day that the entry becomes inactive by entering the information in the field
or by using the scroll bar in the Choose Time window, which displays when you click the field.
Click
Now
to use the current time of day. Click
Done
to close the window.
