1
Preparing for installation
The HPE MSR2000 Router Series includes the models in
Table 1 HPE MSR2000 Router Series models
Router model
Product code
HPE description
RMN
MSR2003
JG411A
HPE MSR2003 Router
BJNGA-BB0009
MSR2004-24
JG734A
HPE MSR2004-24 Router
BJNGA-BB0031
MSR2004-48
JG735A
HPE MSR2004-48 Router
BJNGA-BB0032
IMPORTANT:
For regulatory identification purposes, every MSR2000 router is assigned a regulatory model
number (RMN). These regulatory model numbers should not be confused with the marketing name
HPE MSR200X or the product codes.
Safety recommendations
Safety symbols
When reading this document, note the following symbols:
WARNING
means an alert that calls attention to important information that if not understood or
followed can result in personal injury.
CAUTION
means an alert that calls attention to important information that if not understood or
followed can result in data loss, data corruption, or damage to hardware or software.
General safety recommendations
•
Keep the chassis and installation tools away from walk areas.
•
Make sure the ground is dry and flat and anti-slip measures are in place.
•
Unplug all the external cables (including power cords) before moving the chassis.
Electricity safety
•
Locate the emergency power-off switch in the room before installation. Shut the power off at
once in case accident occurs. Disconnect the power cord of the router if necessary.
•
Make sure the router is correctly grounded.
•
Do not open or close the chassis cover when the router is powered on.
•
Correctly connect the interface cables of the router.
•
Use an uninterrupted power supply (UPS).
•
Do not work alone when the router has power.
•
Always make sure the power has been disconnected during the installation and replacement
procedures.