24
Figure 26 Completing the device driver installation wizard
Setting terminal parameters
To access the device through the console port, you must run a terminal emulator program
(HyperTerminal, PuTTY, or Tera Term) on the configuration terminal. For information about using a
terminal emulator program, see the program's user guide.
The following are the required terminal settings:
•
Baud
rate
—9600.
•
Data
bits
—8.
•
Stop
bits
—1.
•
Parity
—none.
•
Flow
control
—none.
Installing power supplies
CAUTION:
Do not install AC and DC power supplies on the same router.
The MSR2004-48 router supports both AC and DC power supplies. The power supplies are hot
swappable on the MSR2004-48 router.
To install a power supply:
1.
Loosen the captive screws on the filler panel in the target slot with a Phillips screwdriver to
remove the filler panel from the slot.
Keep the removed filler panel for future use.
Skip this step if the router is shipped with this slot empty.