395
Connection limit configuration commands
connection-limit apply policy
Use
connection-limit apply policy
to apply a connection limit policy to the NAT module.
Use
undo connection-limit apply policy
to remove the application.
Syntax
connection-limit apply policy
policy-number
undo connection-limit apply policy
policy-number
Views
System view
Default command level
2: System level
Parameters
policy-number
: Specifies the number of an existing connection limit policy. The value is 0.
Usage guidelines
After a connection limit policy is applied, you cannot add, remove, or modify the connection limit rules
in the connection limit policy view.
Examples
# Apply connection limit policy 0.
<Sysname> system-view
[Sysname] connection-limit apply policy 0
Related commands
connection-limit policy
connection-limit policy
Use
connection-limit policy
to create a connection limit policy and enter connection limit policy
view.
Use
undo connection-limit policy
to delete the specified or all connection limit policies. By default,
no connection limit policy is created.
Syntax
connection-limit policy
policy-number
undo connection-limit policy
policy-number
Views
System view
Default command level
2: System level
Parameters
policy-number
: Specifies the number of a connection limit policy. The value is 0.
