307
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command displays the configuration information of all IKE proposals in the descending order of
proposal priorities.
Examples
# Display the settings of all IKE proposals.
<Sysname> display ike proposal
priority authentication authentication encryption Diffie-Hellman duration
method algorithm algorithm group (seconds)
--------------------------------------------------------------------------
10 PRE_SHARED SHA DES_CBC MODP_1024 5000
11 PRE_SHARED MD5 DES_CBC MODP_768 50000
default PRE_SHARED SHA DES_CBC MODP_768 86400
Table 48 Command output
Field Description
priority
Priority of the IKE proposal.
authentication method
Authentication method used by the IKE proposal.
authentication algorithm
Authentication algorithm used by the IKE proposal.
encryption algorithm
Encryption algorithm used by the IKE proposal.
Diffie-Hellman group
DH group used in IKE negotiation phase 1.
duration (seconds)
ISAKMP SA lifetime (in seconds) of the IKE proposal.
Related commands
•
authentication-method
•
ike
proposal
•
encryption-algorithm
•
authentication-algorithm
•
dh
•
sa
duration
display ike sa
Use
display ike sa
to display information about the current IKE SAs.
Syntax
display
ike
sa
[
verbose
[
connection-id
connection-id
|
remote-address
[
ipv6
]
remote-address
] ] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Views
Any view
Default command level
1: Monitor level
