200
Examples
# Set the user authentication timeout time to 40 seconds.
<Sysname> system-view
[Sysname] password-control authentication-timeout 40
password-control complexity
Use
password-control complexity
to configure the password complexity checking policy.
Complexity-incompliant passwords will be refused.
Use
undo password-control complexity check
to remove a password complexity checking item.
Syntax
password-control complexity
{
same-character
|
user-name
}
check
undo password-control complexity
{
same-character
|
user-name
}
check
Default
No user password complexity checking is performed, and a password can contain the username, the
reverse of the username, or a character repeated three or more times consecutively.
Views
System view
Default command level
2: System level
Parameters
same-character
: Refuses a password that contains any character repeated consecutively three or
more times.
user-name
: Refuses a password that contains the username or the reverse of the username.
Examples
# Configure the password complexity checking policy, refusing any password that contains the
username or the reverse of the username.
<Sysname> system-view
[Sysname] password-control complexity user-name check
Related commands
display password-control
password-control composition
Use
password-control composition
to configure the password composition policy.
Use
undo password-control composition
to restore the default.
Syntax
password-control composition type-number
type-number
[
type-length
type-length
]
undo password-control composition
Default
In non-FIPS mode, the global password composition policy is as follows: A password must contain at
least one type of characters, for example, uppercase letters, lowercase letters, digits or special
