HPE FlexNetwork 7500 Switch, Руководство по установке

Страница: 43 / 149

37
Table 10 PoE power supplies
Power supply Max. output power
Power cords
provided
Power cord connection
PSR1400-D 6720 W No Connecting the PSR1400-D
PSR2800-ACV
•
1150 W (110 V)
•
1400 W (220 V)
Yes Connecting the PSR2800-ACV
PSR6000-ACV
•
One-line PoE input:
{
1200 W (110 V)
{
1800 W (220 V)
•
Two-line PoE input:
{
2400 W (110 V)
{
3600 W (220 V)
•
Three-line PoE
input:
{
3600 W (110 V)
{
5300 W (220 V)
Yes Connecting the PSR6000-ACV
NOTE:
•
When the switch uses a PSR1400-D to supply PoE power, you can monitor the operating status of the
external power supply through the PoE power monitoring port. The PoE power monitoring port is an RS-485
compliant port. You can select an RS-485 compliant connection method according to the monitoring port
type. When you use a 48 VDC power source, you do not need to monitor the operating status of the external
power supply.
•
When the switch uses a PSR6000-ACV to supply PoE power, make sure the input voltage for the system
power input, PoE 1, PoE 2, and PoE 3 is the same. It can be either 110 VAC or 220 VAC.
Installing a PoE DIMM
CAUTION:
•
Avoid touching the components on the PoE DIMM and PCB during installation and removal of a PoE DIMM.
•
If no PoE DIMM is in place or the module is not fully seated, the interface module cannot supply power,
though other functions work well.
The PoE DIMM slot is a reverse insertion prevention slot to help you identify the direction for
installing a PoE DIMM.
Installing the LSQM1POEDIMMS0
1.
Wear an ESD wrist strap and make sure it has a good skin contact and is reliably grounded. For
more information, see "
Attaching an ESD wrist strap ."
2.
Make sure the module is sturdy. Then find the PoE DIMM slot (there is a master mark on the
PCB under the slot) on the PCB.
3.
Pull the white clips on the two sides of the PoE DIMM slot outward, as shown by callout 1
in
Figure 31 .
4.
Unpack the PoE DIMM, and align the golden plating of the PoE DIMM with the groove on the
slot.
5.
As shown by callout 2 in Figure 31 , use your thumbs to press the edges of the PoE DIMM and
push it along the guide rail into the slot until the white clips click into the grooves on the two
sides of the PoE DIMM.
6.
Verify that the clips lock the PoE DIMM.