240
EAA executes an interface event monitor policy when the monitored interface traffic statistic crosses
the start threshold in the following situations:
•
The statistic crosses the start threshold for the first time.
•
The statistic crosses the start threshold each time after it crosses the restart threshold.
The following is the interface event monitor process of EAA:
1.
Compares the traffic statistic sample with the start threshold at sampling intervals until the
comparison result meets the condition specified by the start operator.
2.
Executes the policy.
3.
Compares the traffic statistic sample with the restart threshold at sampling intervals until the
comparison result meets the condition specified by the restart operator.
4.
Compares the traffic statistic sample with the start threshold at sampling intervals until the
comparison result meets the condition specified by the start operator.
5.
Executes the policy again.
This process cycles for the monitor policy to be executed and re-executed.
Examples
# Configure a CLI-defined policy to monitor the incoming error packet statistic on
Ten-GigabitEthernet 1/0/1 every 60 seconds. Set the start threshold to 1000 and the restart threshold
to 50. Enable EAA to execute the policy when the statistic exceeds 1000 for the first time. Enable
EAA to re-execute the policy if the statistic exceeds 1000 each time after the statistic has dropped
below 50.
<Sysname> system-view
[Sysname] rtm cli-policy test
[Sysname-rtm-test] event interface gigabitethernet 1/0/1 monitor-obj input-errors
start-op gt start-val 1000 restart-op lt restart-val 50 interval 60
event process
Use
event process
to configure a process event for a CLI-defined monitor policy.
Use
undo event
to delete the event in a CLI-defined monitor policy.
Syntax
In standalone mode:
event process
{
exception
|
restart
|
shutdown
|
start
}
[
name
process-name
[
instance
instance-id
]
]
[
slot
slot-number
]
undo event
In IRF mode:
event process
{
exception
|
restart
|
shutdown
|
start
}
[
name
process-name
[
instance
instance-id
]
]
[
chassis
chassis-number
[
slot
slot-number
] ]
undo event
Default
No process events are configured.
Views
CLI-defined policy view
Predefined user roles
network-admin
mdc-admin
Содержание FlexNetwork 7500 Series
Страница 238: ...229 Sysname ...
Страница 420: ...411 Related commands packet capture ...
Страница 430: ...421 U url 78 username 79 user role 249 V version 80 vpn instance 81 W Websites 415 X xml 227 ...
