HPE FlexNetwork 7500 Series, Справочник команд управления и мониторинга сети

Страница: 23 / 430

14
Views
ICMP/UDP echo operation view
Path/UDP jitter operation view
UDP tracert operation view
Voice operation view
ICMP/UDP template view
Predefined user roles
network-admin
mdc-admin
Parameters
size : Specifies the size of the payload in each probe packet in bytes. Available value ranges include:
•
20 to 65507 for the ICMP echo, UDP echo, or UDP tracert operation.
•
68 to 65507 for the UDP jitter or path jitter operation.
•
16 to 65507 for the voice operation.
Usage guidelines
In ICMP echo and path jitter operations, the command sets the payload size for each ICMP echo
request.
In UDP echo, UDP jitter, UDP tracert, and voice operations, the command sets the payload size for
each UDP packet.
Examples
# Set the payload size to 80 bytes for each ICMP echo request.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] data-size 80
# In ICMP template view, set the payload size to 80 bytes for each request.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] data-size 80
description (any NQA operation type view)
Use description to configure a description for an NQA operation, such as the operation type or
purpose.
Use undo description to remove the description.
Syntax
description text
undo description
Default
No description is configured for an NQA operation.