448
Configuring EBGP between an MCE and a PE
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP view.
bgp as-number
N/A
3.
Enter BGP-VPN instance
view.
ip
vpn-instance
vpn-instance-name
N/A
4.
Configure the PE as an
EBGP peer.
peer
{
group-name
|
ipv6-address
[
prefix-length
] }
as-number
as-number
By default, no BGP peer is
configured.
5.
Enter BGP-VPN IPv6 unicast
address family view.
address-family ipv6
[
unicast
]
N/A
6.
Enable BGP to exchange
IPv6 unicast routes with the
specified peer.
peer
{
group-name
|
ipv6-address
[
prefix-length
] }
enable
By default, BGP does not
exchange IPv6 unicast routes with
any peer.
7.
Redistribute VPN routes.
import-route
protocol
[
process-id
[
allow-direct
|
med
med-value
|
route-policy
route-policy-name
] * ]
By default, no routes are
redistributed into BGP.
8.
(Optional.) Configure filtering
of advertised routes.
filter-policy
{
acl6-number
|
prefix-list
ipv6-prefix-name
}
export
[
protocol process-id
]
By default, BGP does not filter
advertised routes.
9.
(Optional.) Configure filtering
of received routes.
filter-policy
{
acl6-number
|
prefix-list
ipv6-prefix-name
}
import
By default, BGP does not filter
received routes.
Configuring IBGP between an MCE and a PE
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP view.
bgp as-number
N/A
3.
Enter BGP-VPN
instance view.
ip vpn-instance
vpn-instance-name
N/A
4.
Configure the PE as an
IBGP peer.
peer
{
group-name
|
ipv6-address
[
prefix-length
] }
as-number
as-number
N/A
5.
Enter BGP-VPN IPv6
unicast address family
view.
address-family ipv6
[
unicast
]
N/A
6.
Enable BGP to
exchange IPv6 unicast
routes with the peer.
peer
{
group-name
|
ipv6-address
[
prefix-length
] }
enable
By default, BGP does not
exchange IPv6 unicast routes
with any peer.
7.
Redistribute the VPN
routes of the VPN site.
import-route
protocol
[
process-id
[
allow-direct
|
med med-value
|
route-policy route-policy-name
] * ]
By default, no routes are
redistributed into BGP.
8.
(Optional.)
Configure
filtering of advertised
routes.
filter-policy
{
acl6-number
|
prefix-list
ipv6-prefix-name
}
export
[
protocol
process-id
]
By default, BGP does not filter
advertised routes.
9.
(Optional.)
Configure
filtering of received
routes.
filter-policy
{
acl6-number
|
prefix-list
ipv6-prefix-name
}
import
By default, BGP does not filter
received routes.
Содержание FlexNetwork 5510 HI Series
Страница 9: ...vii Remote support 460 Documentation feedback 460 Index 462 ...
Страница 318: ...309 Request list 0 Retransmit list 0 ...
Страница 363: ...354 Verify that CE 1 and CE 2 can ping each other Details not shown ...
Страница 446: ...437 The MCE has redistributed the OSPF routes of the two VPN instances into the EBGP routing tables of PE 1 ...
