311
Views
Any view
Predefined user roles
network-admin
Parameters
var-name
: Specifies a user-defined EAA environment variable by its name. If you do not specify a
variable, this command displays all user-defined EAA environment variables.
Examples
# Display all user-defined EAA environment variables.
<Sysname> display rtm environment
Name Value
save_cmd save main force
show_run_cmd display current-configuration
display rtm policy
Use
display rtm policy
to display monitor policies.
Syntax
display rtm policy
{
active
|
registered
} [
policy-name
]
Views
Any view
Predefined user roles
network-admin
Parameters
active
: Displays policies that are running.
registered
: Displays policies that have been created.
policy-name
: Specifies a policy by its name. If you do not specify a policy, this command displays all
monitor policies that are running or have been created.
Examples
# Display all running monitor policies.
<Sysname> display rtm policy active
JID Type Event TimeActive PolicyName
507 TCL INTERFACE Apr 21 17:45:38 2012 test1
# Display all monitor policies that have been created.
<Sysname> display rtm policy registered
Total number: 3
Type Event TimeRegistered PolicyName
CLI Jan 01 06:05:09 2013 acli
CLI Jan 01 06:30:29 2013 syslog
CLI CLI Jan 01 08:24:07 2013 test
