manualshive.com logo in svg

HPE FlexFabric 5700 Series, Руководство по настройке управления и мониторинга сети

Поделиться
Скачать
HPE FlexFabric 5700 Series Скачать руководство пользователя страница 212

 

203 

# Execute the 

loopback0

 command. Verify that the system displays the 

loopback0

 message and a 

policy successfully executed message on the terminal screen. 

<Sysname> loopback0 

<Sysname> 

%Jan  3 09:46:10:592 2014 Sysname RTM/0/RTM_ACTION: loopback0 

%Jan  3 09:46:10:613 2014 Sysname RTM/6/RTM_POLICY: CLI policy test is running 

successfully. 

# Verify that Loopback 0 has been created and assigned the IP address 1.1.1.1. 

<Sysname> terminal monitor 

<Sysname> display interface loopback brief 

Brief information on interface(s) under route mode: 

Link: ADM - administratively down; Stby - standby 

Protocol: (s) - spoofing 

Interface            Link Protocol Main IP         Description 

Loop0                UP   UP(s)    1.1.1.1 

<Sysname> 

Tcl-defined policy configuration example 

Network requirements 

Use Tcl to create a monitor policy on the device. This policy must meet the following requirements: 

•

 

EAA sends the log message "rtm_tcl_test is running" when a command that contains the 

display this

 string is entered. 

•

 

The system executes the command only after it executes the policy successfully. 

Configuration procedure 

# Edit a Tcl script file (rtm_tcl_test.tcl, in this example) for EAA to send the message "rtm_tcl_test is 
running" when a command that contains the 

display this

 string is executed.  

::comware::rtm::event_register cli sync mode execute pattern display this user-role 

network-admin 

::comware::rtm::action syslog priority 1 facility local4 msg rtm_tcl_test is running 

# Download the Tcl script file from the TFTP server at 

1.2.1.1

. 

<Sysname> tftp 1.2.1.1 get rtm_tcl_test.tcl 

# Create the Tcl-defined policy 

test

 and bind it to the Tcl script file. 

<Sysname> system-view 

[Sysname] rtm tcl-policy test rtm_tcl_test.tcl 

[Sysname] quit 

Verifying the configuration 

# Display information about the policy. 

<Sysname> display rtm policy registered 

Total number: 1                                                                  

Type  Event      TimeRegistered       PolicyName                                 

TCL   TCL        Apr 21 16:33:00 2012 test 

# Enable the information center to output log messages to the current monitoring terminal. 

<Sysname> terminal monitor 

# Execute the 

display this

 command. Verify that the system displays the "rtm_tcl_test is running" 

message and a message that the policy is being successfully executed. 

Содержание FlexFabric 5700 Series



























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды