HPE Edgeline EL300 Скачать руководство пользователя страница 72

Страница: 72 / 91

A page displays showing the connection options for the cellular modem.

Connect automatically is selected by default. The

system is now connected to cellular broadband.

4. Verify the connection by pinging a responsive server.

Viewing installed firmware information

Procedure

Click

Firmware in the navigation tree.

The

Firmware page displays firmware information for various system components. If the system is powered off, the

information on this page is current as of the last power off. Firmware information is updated only when the system is powered
on and POST is complete.

Firmware types

The firmware types listed on the

Firmware page vary based on the system configuration.

For most configurations, the system BIOS, CPLD, and iSM firmware and base image are listed.

Firmware details

The Firmware page displays the following information for each listed firmware type:

•

Firmware name -The category name of the firmware.

•

Firmware version -The currently installed version number of the firmware.

Updating firmware

While firmware can be updated using components uploaded to the iSM Repository, you can also update firmware directly.

Prerequisites
iSM Admin privilege.

Procedure

1. Click Firmware in the navigation tree, and then click Update Firmware in the right pane.

2. Select the Local file or Remote file option.

3. Depending on the option you selected, do one of the following:

a. In the File box, click Browse (Internet Explorer, Edge, or Firefox) or Choose File (Chrome), and then specify the location

of the firmware component.

b. In the URL box, enter the URL for a firmware component on an accessible web server.

4. Click Flash.

The firmware update status will be visible in the event log.

72 Configuration

Содержание Edgeline EL300




























































































Результаты поиска

Содержание Edgeline EL300

Отзывы:

Бренды по названию

Популярные бренды

HPE Edgeline EL300, Руководство по настройке и конфигурации

Результаты поиска

Содержание Edgeline EL300

Отзывы:

Бренды по названию

Популярные бренды