HPE D3600, Руководство пользователя

Страница: 62 / 71

11 Regulatory compliance notices
This section contains regulatory notices for the HPE StorageWorks D3600/3700 12Gb SAS disk
enclosures.
Regulatory compliance identification numbers
For the purpose of regulatory compliance certifications and identification, this product has been
assigned a unique regulatory model number. The regulatory model number can be found on the
product nameplate label, along with all required approval markings and information. When
requesting compliance information for this product, always refer to this regulatory model number.
The regulatory model number is not the marketing name or model number of the product.
Federal Communications Commission notice
Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established
Radio Frequency (RF) emission limits to provide an interference-free radio frequency spectrum.
Many electronic devices, including computers, generate RF energy incidental to their intended
function and are, therefore, covered by these rules. These rules place computers and related
peripheral devices into two classes, A and B, depending upon their intended installation. Class
A devices are those that might reasonably be expected to be installed in a business or commercial
environment. Class B devices are those that might reasonably be expected to be installed in a
residential environment (for example, personal computers). The FCC requires devices in both
classes to bear a label indicating the interference potential of the device as well as additional
operating instructions for the user.
This is a class A device.
FCC rating label
The FCC rating label on the device shows the classification (A or B) of the equipment.
Class A equipment
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, might cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at personal
expense.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device
that are not expressly approved by Hewlett Packard Enterprise might void the user's authority
to operate the equipment.
Cables
When provided, connections to this device must be made with shielded cables with metallic
RFI/EMI connector hoods in order to maintain compliance with FCC Rules and Regulations.
62 Regulatory compliance notices