HPE Cloudline CL2600 Gen10, Руководство пользователя и по обслуживанию

Страница: 109 / 141

To remove an expansion card from the secondary riser:
a. Remove the primary riser cage.
b. Lift the secondary rear wall.
c. Remove the expansion card.
To replace the component, reverse the removal procedure.
Removing and replacing a rear serial port interface
Procedure
1. Power down the server ( Power down the server ).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Removal and replacement procedures 109