Error messages—Track interface
Message
Description
Invalid input: out of range value
You have to assign a valid port or trunk to the VR
instance.
Can't track a port that is part of a trunk
You cannot configure tracking on a port that is a
member of a trunk.
Tracking is disabled on owner
You cannot configure a track interface on an owner VR.
Cannot remove trunk being tracked by VRRP
You cannot remove a trunk that is being tracked by a
VR
Cannot enable LACP on a VRRP tracked port
You cannot enable LACP on a port that is being
tracked by a VR.
Too many entities to track
You have selected too many entities to be tracked by
the VR.
Cannot track trunk/LACP member
You cannot track the specified trunk or LACP member.
VRRP tracked port is not allowed in trunk
You cannot add this tracked port to a trunk.
VRRP tracked port is not allowed in LACP
You cannot use LACP with the tracked port.
Operation is not permitted on VR when it is configured
as owner or is uninitialized.
The VR must be a backup and initialized in order to
execute the operation.
Chapter 16 Virtual Router Redundancy Protocol (VRRP)
355
