Status
Definition
Solid green
The power supply is operating normally.
Off
One or more of the following conditions exists
• Power is unavailable
• Power supply failure
• Power supply is in standby mode
• Power supply error
Fan bay numbering
• Fans 1–4 are the default system fans.
• Fans 5–8 are available through the redundant fan option kit.
• The dual-rotor fan 9–10 is required when installing the HPE 1800W–2200W Flex Slot Platinum Hot-plug Power
Supply.
Drive bay numbering
Drive bay numbering depends on how the drive backplane is connected. The backplane can be connected to one of the
following:
• Embedded HPE Smart Array S100i SR Gen10 Controller
• Smart Array type-p storage controller
• SAS expander daughter card – This daughter card is in the SAS expander module. This module is only available in the
HPE Apollo DX2800 Gen10 Chassis with 24 SFF drive model.
When the backplane is connected to a Smart Array controller, the drive bay numbering for each drive box starts at 1.
Component identification
15
