447
Task
Command
Remarks
about join/prune
messages to send.
vpn-instance-name
]
join-prune mode
{
sm
[
flags
flag-value
]
|
ssm
} [
interface
interface-type
interface-number
|
neighbor
ipv6-neighbor-address
] *
[
verbose
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Display IPv6 PIM
neighboring
information.
display pim ipv6
[
all-instance
|
vpn-instance
vpn-instance-name
]
neighbor
[
interface
interface-type
interface-number
|
ipv6-neighbor-address
|
verbose
] * [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view.
Display information
about the IPv6 PIM
routing table.
display pim ipv6
[
all-instance
|
vpn-instance
vpn-instance-name
]
routing-table
[
ipv6-group-address
[
prefix-length
] |
ipv6-source-address
[
prefix-length
] |
incoming-interface
[
interface-type
interface-number
|
register
] |
outgoing-interface
{
include
|
exclude
|
match
} {
interface-type
interface-number
|
register
} |
mode
mode-type
|
flags
flag-value
|
fsm
] * [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view.
Display the RP
information.
display pim ipv6
[
all-instance
|
vpn-instance
vpn-instance-name
]
rp-info
[
ipv6-group-address
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view.
Reset IPv6 PIM control
message counters.
reset pim ipv6
[
all-instance
|
vpn-instance
vpn-instance-name
]
control-message counters
[
interface
interface-type interface-number
]
Available in user
view.
IPv6 PIM configuration examples
This section describes details about IPv6 PIM configuration examples.
IPv6 PIM-DM configuration example
Network requirements
As shown in
•
Receivers receive VOD information through multicast. The receiver groups of different
organizations form stub networks, and one or more receiver hosts exist in each stub network.
The entire IPv6 PIM domain operates in the dense mode.
•
Host A and Host C are multicast receivers in two stub networks N1 and N2.
•
MLDv1 runs between Switch A and N1 and between Switch B, Switch C, and N2.
