214
[SwitchA] display msdp brief
MSDP Peer Brief Information of VPN-Instance: public net
Configured Up Listen Connect Shutdown Down
2 2 0 0 0 0
Peer's Address State Up/Down time AS SA Count Reset Count
10.110.3.2 Up 01:07:08 ? 8 0
10.110.6.2 Up 00:16:39 ? 13 0
# Display brief MSDP peer information on Switch D.
[SwitchD] display msdp brief
MSDP Peer Brief Information of VPN-Instance: public net
Configured Up Listen Connect Shutdown Down
1 1 0 0 0 0
Peer's Address State Up/Down time AS SA Count Reset Count
10.110.1.1 Up 01:07:09 ? 8 0
# Display brief MSDP peer information on Switch G.
[SwitchG] display msdp brief
MSDP Peer Brief Information of VPN-Instance: public net
Configured Up Listen Connect Shutdown Down
1 1 0 0 0 0
Peer's Address State Up/Down time AS SA Count Reset Count
10.110.2.1 Up 00:16:40 ? 13 0
Anycast RP configuration
Network requirements
As shown in
:
•
The PIM-SM domain has multiple multicast sources and receivers. OSPF runs within the
domain to provide unicast routes.
Configure the Anycast RP application to meet the following requirements:
•
The receiver-side DRs and the source-side DRs can initiate a Join message to their respective
RPs that are the topologically nearest to them.
•
On Switch B and Switch D, configure the interface Loopback 10 as a C-BSR and Loopback 20
as a C-RP.
•
Configure the router ID of Switch B as 1.1.1.1, and the router ID of Switch D as 2.2.2.2. Set up
an MSDP peering relationship between Switch B and Switch D.
