HPE 3PAR SSMC guidelines
• The HPE 3PAR SSMC must
not
be installed on the HPE 3PAR Service Processor (SP) or a storage
system running a virtual SP, and instead the HPE 3PAR SSMC must be installed on a separate
customer system running Linux or Windows OSs.
• The HPE 3PAR SSMC must be run locally from the storage system on which it is installed.
HPE 3PAR SSMC documentation
The following documents are available at the Hewlett Packard Enterprise Information Library Storage
website:
• The
HPE 3PAR StoreServ Management Console Release Notes
provide OS-dependent details.
• The
HPE 3PAR StoreServ Management Console Administrator Guide
provides information on
planning, installing, and configuring HPE 3PAR SSMC server instances.
• The
HPE 3PAR StoreServ Management Console User Guide
and the
HPE 3PAR StoreServ
Management Console Online Help
provide information for managing a storage system after installing
an HPE 3PAR SSMC server instance.
HPE 3PAR StoreServ Management Console connection
To establish a connection to the HPE 3PAR StoreServ Management Console (SSMC), use a standard
web browser and browse to the address
https://<localhost>:8443
.
HPE 3PAR StoreServ Management Console interfaces
Interfaces for the HPE 3PAR StoreServ Management Console (SSMC):
•
Main Console
(SSMC console)—Manage a storage system.
•
Administrator Console
(Admin console)—Add, edit, connect, disconnect, and remove a storage
system; accept certificates, and view connected and disconnected systems.
About the HPE InfoSight platform
Overview
HPE InfoSight is a cloud-based predictive analytics platform that can be used with your HPE 3PAR
StoreServ Storage system for planning, managing, monitoring, and troubleshooting.
The HPE InfoSight web portal is available at
IMPORTANT:
HPE InfoSight replaces HPE StoreFront Remote (SFRM).
The SFRM functionality has been embedded in HPE InfoSight.
Registration of a storage system with InfoSight
The registration process validates ownership of the HPE 3PAR StoreServ Storage system and makes the
system data available to those who are authorized.
Systems that are registered with HPE InfoSight must be added to a system group, and then users in the
organization can be added to the system group. Typically, a single system group is all that is necessary to
manage multiple systems through the process of assigning users and setting their roles and permissions
for the system group.
More information
75
