HP ZBook Fury 17 G7 Скачать руководство пользователя страница 164 | Manualshive

Страница: 164 / 232

HP ZBook Fury 17 G7 Скачать руководство пользователя страница 164

I/O devices

Use this information to troubleshoot I/O device issues.

NOTE:

●

Make sure external devices are supported and compliant (for example, USB Type-C, Thunderbolt 3, PCI
Express).

●

If you have problems with external devices not provided by HP, contact device manufacturers for
compatibility and latest drivers before troubleshooting (for example, USB devices, Thunderbolt devices, PCI
express card reader, VGA, display, HDMI monitors, speakers).

●

Be sure I/O devices are properly inserted into the I/O ports, and then be sure that Windows Device Manager
recognizes the I/O devices.

Keyboard

Use this information to troubleshoot keyboard issues.

Table 7-34

Issues, possible causes, and fixes

Items

Procedures

Symptoms

Keystrokes not recognized

Characters not matched

Possible causes

Dust trapped under keycap, loose keycap, loose keyboard connection, defective keyboard.

Troubleshooting steps

1.

Inspect the keyboard for any signs of dust, liquid, or debris trapped under sticky keys that
might prevent keystroke recognition.

2.

Check for incomplete connection between keyboard and system board by verifying that

caps lock

or

num lk

light turns on when you press the key.

3.

Verify whether the keyboard is recognized in Windows Device Manager, and verify
whether the keyboard driver is installed properly.

4.

Test with a working external keyboard (such as a USB keyboard).

Also test in Windows for special keys (

caps lock

,

shift

,

ctrl

,

fn

,

Windows

,

alt

) if necessary.

5.

Test with HP PC Hardware Diagnostics (UEFI) to isolate a hardware issue from a software
issue.

6.

Verify that BIOS is up to date. If so, resetting BIOS to default may help.

7.

Test with a verified working operating system, or restore the operating system to be sure
that the issue is not caused by items such as different language settings, sticky keys
feature, and so on.

8.

Verify that keyboard flex cables are fully inserted and in good condition.

The following steps are for authorized providers and technicians.

150 Chapter 7 Troubleshooting guide

ENWW

«
...
162
163
164
165
166
...
»

Содержание ZBook Fury 17 G7









































































































































































































































Отзывы:

Нет отзывов