HP ZBook Fury 17 G7 Скачать руководство пользователя страница 144 | Manualshive

Страница: 144 / 232

HP ZBook Fury 17 G7 Скачать руководство пользователя страница 144

Battery discharges too fast

Use this information to troubleshoot battery issues.

Table 7-13

Issues, possible causes, and fixes

Items

Procedures

Symptoms

Battery has good status light but discharges
too fast

Possible causes

AC adapter, battery, or both.

Troubleshooting steps

Verify AC adapter

Determine whether the computer needs the AC adapter to boot and operate. Sometimes
an intermittently bad AC adapter and loose connection between adapter and computer
results in the inability to charge the battery and causes short runtime.

1.

Inspect AC adapter to verify that it is working.

2.

Test with AC adapter alone and with a verified working AC adapter.

Verify battery: Because battery capacity can degrade over time, check the warranty
coverage. Run a battery test to confirm whether issue is hardware related.

1.

Review battery power plans in Control Panel > Power Options that may consume
more energy and discharge battery faster. Resetting default to Power Saver option
can conserve battery power.

2.

Determine whether any graphics are processing.

3.

Verify battery maintenance and operations. Leaving the battery at a high level of
charge in a high-temperature environment for extended periods accelerates the
loss of capacity.

4.

Test and calibrate battery using HP PC Hardware Diagnostics (UEFI).

5.

Verify battery life cycle using HP Support Assistant tool.

If battery cycle life is past its life expectancy (past the 1000-cycle life and 3-year
warranty), the battery might need to be replaced.

6.

Compare discharge time with a verified working battery (remove AC adapter) using
Hardware Diagnostics (UEFI)>Hard Drive Tests>Extensive Test>Loop until error.

Tips

To conserve battery power, turn off Wireless On-Off button and other peripherals and
USB devices, applications, processes (in Task Manager) when not in use; also, reduce
screen brightness.

Follow HP instructions about how to maintain battery and increase battery life. Also
reference

http://support.hp.com/us-en/document/c01297640?

jumpid=hpr_r1002_usen_link3

Burnt smell

Use this information to troubleshoot burnt-odor issues.

130 Chapter 7 Troubleshooting guide

ENWW

«
...
142
143
144
145
146
...
»

Содержание ZBook Fury 17 G7









































































































































































































































Отзывы:

Нет отзывов