background image

  

Product End-of-Life Disassembly Instructions 

HP xw9400 Workstation

Product Category: Workstations

 

Marketing Name / Model 
[List multiple models if applicable.] 

HP xw9400 Workstation 

- Standard 

configuration 

Optional liquid cooled configuration 

Purpose: 

The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions 

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU 
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 

1.0 

Items Requiring Selective Treatment

1.1

 Items listed below are classified as requiring selective treatment. 

1.2

 Enter the quantity of items contained within the product which require selective treatment in the right column, as 

applicable. 

Item Description

Notes 

Quantity 
of items 
included 
in product

Printed Circuit Boards (PCB) or Printed Circuit 
Assemblies (PCA) 

With a surface greater than 10 sq cm. 
There are two in the power supply, one graphics 
card, and one system board. (Additional cards may 
be present depending on the configuration.) 

4

 

Batteries 

All types including standard alkaline and lithium coin 
or button style batteries.              

Mercury-containing components 

For example, mercury in lamps, display backlights, 
scanner lamps, switches, batteries             

None 

Liquid Crystal Displays (LCD) with a surface greater 
than 100 sq cm 

Includes background illuminated displays with gas 
discharge lamps.        

None 

Cathode Ray Tubes (CRT) 

            

None 

Capacitors / condensers (Containing PCB/PCT) 

            

None 

Electrolytic Capacitors / Condensers measuring 
greater than 2.5 cm in diameter or height 

 Fifteen attached to the power supply boards. 

15 

External electrical cables and cords 

       

None 

Gas Discharge Lamps 

            

None 

Plastics containing Brominated Flame Retardants 

       

None 

Components and parts containing toner and ink, 
including liquids, semi-liquids (gel/paste) and toner 

Include the cartridges, print heads, tubes, vent 
chambers, and service stations.             

None 

Components and waste containing asbestos 

       

None 

Components, parts and materials containing 
refractory ceramic fibers 

            

None 

Components, parts and materials containing 

       

None 

EL-MF877-00                                                                                                Page  1 
Template Revision A 

                                      438710-001 

 

  

Содержание xw9400



















Отзывы: