HP XP Скачать руководство пользователя страница 22

Страница: 22 / 148

◦

Non Transportable — Supported (Raw Device Mapping, corresponding to VMware
Guest to Guest Backup (FC) function)

–

Transportable Configuration Application Server — Supported

–

Transportable Configuration Backup Server — Supported (Raw Device Mapping,
corresponding to VMware Guest to Guest Backup (FC) function)

Software

Table shows the software that is needed in order to use VSS Provider.

Version

Usage

Storage/OS

Software

v01.32.06 and later

Required for a backup using
Business Copy, Snapshot

XP P9500

RAID Manager

(SS), and Snapshot (FS)
function.

v01.32.06 and later

Required for a backup using
Business Copy function or
Snapshot (FS) function.

XP7

v01.32.06 and later

Required for a backup using
Business Copy, Snapshot

Virtual DKC(Ext Stor)

(SS), and Snapshot (FS)
function.

Services

To use VSS Provider, start Volume Shadow Copy Service manually or automatically.

The software required to use the VMware Guest to Guest Backup (FC) function

To use the VMware Guest to Guest Backup (FC) function, the software listed is required.

•

JRE 1.7(x64) — Required to be installed in the virtual machine in which the secondary VOL
(S-VOL/V-VOL) copied by VSS Provider is imported.

Since JRE is not included in the installer of VSS Provider, JRE installation is required when
implementing VSS Provider.

•

VMware vCenter Server — Required to build 5.1 update1 b or 5.5 a.

•

VMware Tools — Required to be installed in the virtual machine in which the secondary VOL
(S-VOL/V-VOL) copied by VSS Provider is imported.

Support scope of Ext Stor configuration

This subsection indicates the support scope of Ext Stor configuration.

RSG

Supported configurations

•

One RSG in VDKC-Box

•

One RSG in respective multiple VDKC-Boxes

•

One RSG each in virtual DKC which straddles multiple physical DKCs

NOTE:

Two or more RSGs in VDKC-Box is not supported

Environmental Prerequisites

Содержание XP





















































































































































Результаты поиска

Содержание XP

Отзывы:

Похожие инструкции для XP

Бренды по названию

Популярные бренды

HP XP, Руководство пользователя

Результаты поиска

Содержание XP

Отзывы:

Похожие инструкции для XP

Бренды по названию

Популярные бренды