manualshive.com logo in svg

HP VMA Series, Инструкция по установке и обслуживанию

Поделиться
Скачать
HP VMA Series Скачать руководство пользователя страница 182

Appendix B - Compliance Information

182

VMA-series Memory Array Installation and Service Guide

HP-AM456-9002A Rev 01

Regulatory Information

For your protection, this product has been tested for conformance to various 
national and international regulations and standards. The scope of this 
regulatory testing includes electrical and mechanical safety, electromagnetic 
emissions, immunity, acoustics, and hazardous materials.

Regulatory Model Number

For the purpose of regulatory compliance certifications and identification, this 
product is assigned a Violin Memory regulatory model number. This number can 
be found on the product label, along with the required approval markings and 
information. When requesting certification information for this product, always 
refer to this regulatory model number.

Note: 

Do not confuse the regulatory model number with the marketing or 

model number.

Electrical Safety

This product has not been evaluated for connection to an “IT” power system (AC 
distribution system having no direct connection to earth according to IEC 
60950).

Installation Conditions

See installation instructions before connecting this equipment to the input 
supply.

WARNING! 

The equipment must be provided with a proper AC protective 

earth (PE) ground connection.

Network Connected Equipment

WARNING! 

The installation must provide a ground connection for the 

network equipment.

Electrostatic Discharge (ESD) Precautions

When handling any electronic component or assembly, you must observe the 
following antistatic precautions to prevent damage. An ESD kit (P/N A3024-

Содержание VMA Series













































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды