HP Vectra VEi 8, Техническое справочное руководство

Страница: 26 / 44

2 System Features
Network
26
Network
The LAN cards described in this section are qualified for use with your
PC. To order one of these products, refer to HP’s Web site at:
www.hp.com/go/vectraaccessories
.
HP 10/100 3Com 3C905B-TX Network Interface Card (D7504A
and D7505A)
The HP 10/100 3Com 3C905B-TX NIC is a 32 bit PCI Ethernet
Controller with advanced manageability features. It features full-
duplex, automatic 10/100 BT port selection, Remote Power-On (RPU),
and Remote Wake-Up (RWU). The card has an optional Boot ROM for
diskless node operation. Support of RPO and RWU depends on the
operating system. To find out more about this network interface card,
refer to the
Technical Reference Manual - Vectra Technology.
HP 10/100 Intel PRO/100+ Management Adapter (D7506A and
D7507A)
The HP 10/100 Intel PRO/100+ Management Adapter is a 32 bit PCI
Ethernet Controller with on-board Boot ROM to allow pre-boot
manageability operations. It features full-duplex, automatic 10/100 BT
port selection, Remote Power-On (RPU), and Remote Wake-Up
(RWU). Support of RPO and RWU depends on the operating system. To
find out more about this management adapter, refer to the
Technical
Reference Manual - Vectra Technology.