HP TFT5600 страница 49 Скачать руководство пользователя | Manualshive

Страница: 49 / 63

background image

Regulatory Compliance Notices

A-2

HP TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide

CONFIDENTIAL

Writer: Amy Laffitte File Name: f-appa Regulatory Compliances

Codename: RUGER Part Number: 229719-003 Last Saved On: 8/12/02 6:44 PM

The rating label on the device shows which class (A or B) the equipment falls into.
Class B devices have an FCC logo or FCC ID on the label. Class A devices do not
have an FCC ID on the label. Once the class of the device is determined, refer to the
following corresponding statement.

Class A Equipment

This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference, in which
case the user will be required to correct the interference at personal expense.

Class B Equipment

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

•

Consult the dealer or an experienced radio or television technician for help.

«
...
47
48
49
50
51
...
»

Содержание TFT5600
































































Отзывы:

Нет отзывов

Похожие инструкции для TFT5600

SyncMaster 753 DFX

Бренд: Samsung Страницы: 82

Бренд: Crystal Image Technologies Страницы: 32

AFID ADVANCED EASY

Бренд: Microlife Страницы: 33

Бренд: I-Inc Страницы: 19

Бренд: Brigade Electronics Страницы: 12

YUR.VISION YV216WB1

Бренд: YURAKU Страницы: 2

Бренд: Parker Страницы: 8

NextVision VPW505

Бренд: ViewSonic Страницы: 2

Бренд: Kidde Страницы: 19

e-VISION 80 LED

Бренд: B&S Страницы: 30

Бренд: A&A Tech Страницы: 19

Video Baby Monitor 720P

Бренд: eufy Security Страницы: 11

Interface Board Kit IB1

Бренд: Ramsey Electronics Страницы: 12

Touch Screen Controller RX141

Бренд: 3M Страницы: 31

Бренд: MultiTouch Страницы: 16

Бренд: iBaby Страницы: 8

Бренд: Vitek Страницы: 2

Бренд: Preco Electronics Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды