manualshive.com logo in svg

HP Tc2120 - Server - 256 MB RAM, Руководство по установке, Страница: 85 / 92

Поделиться
Скачать
HP Tc2120 - Server - 256 MB RAM Скачать руководство пользователя страница 85

 

• 

Kernel-2.4.18-17.7.x.i686.rpm

 may be found on the Web at 

 

ftp://ftp.redhat.com/pub/Red Hat/linux/updates/7.3/en/os/i686/kernel-2.4.18-
18.7.x.i686.rpm

 

1. 

To update the kernel, press 

Ctrl

-

Alt

-

F2

. 

2. 

Insert the media containing the updated modutils (2.4.18-3.7) and kernel (2.4.18-
17) rpms. If on a CD-ROM, mount the CD-ROM using: 

mount /dev/cdrom

. 

3. 

Use command 

rpm –Uvh modutils-2.4.18-3.7x.i386.rpm

 to 

update the modutils. The modutils package must be updated first in order to add 
the new kernel. 

4. 

Use the command 

rpm –ivh kernel-2.4.18-17.7.x.i686.rpm

 to 

add the kernel to the Red Hat 7.3 installation. 

5. 

Using an editor such as vi, add the following into /etc/lilo.conf: 
 
Image=/boot/vmlinuz-2.4.18-17.7.x 
 label=linux-2.4.18-17 
 initrd=/boot/initrd-2.4.18-17.7.x.img 
 read-only 
 root=/dev/hda3 

6. 

Change the "default=

...

" line to default=linux-2.4.18-17. This will make the 

2.4.18-17 kernel load by default. 

7. 

Save your changes. 

8. 

Run lilo -v. 

9. 

Reboot the server. 

Section 2. Install Additional HP Accessories 

The hp server tc2120 Startup CD includes the drivers for the following HP 
accessories: 

• 

HP 10/100 LAN Adapter 

• 

HP 10/100/1000 LAN Adapter 

 

85 

  

HP CONFIDENTIAL

 

Writer: Jimmy Chan File Name: 312977-006.doc 

Codename: Condor II Part Number: 312977-006 Last Saved On: 9/10/03 10:05 AM 

Содержание Tc2120 - Server - 256 MB RAM





























































































Отзывы:

Нет отзывов