HP Tc2120 - Server - 256 MB RAM, Руководство по установке, Страница: 73 / 92

2.
At the "Keyboard Configuration" screen, select U.S. English and click Next .
3.
At the "Mouse Configuration" screen, select the appropriate mouse for your
system, and click
Next .
4.
At the Installation Type screen, choose the type of installation to be performed.
Choose
Server or Custom .
1.3 Disk Partitioning
1.
At the "Disk Partitioning Setup" screen, choose Manually partition with Disk
Druid . Click Next .
2.
You may see a Warning box pop up that says that "the partition table on device
xxx is unreadable, would you like to initialize this drive?" Click
Yes as many
times as this comes up.
3.
Locate the drive you wish to install to/boot from. If there are existing partitions
on this drive, select them and click
Delete . A warning box will come up to
confirm the deletion, click Delete . Repeat this for every partition on this drive.
Note that the partitions and all data within them will be lost.
4.
Create, at minimum, three new partitions for the Linux installation as follows:
Table 2: Partitions for Linux Installation
Mount Point Partition Type Size
/boot Boot Partition Ext3 100Mb
/ Root Partition Ext3 2Gb+
swap Swap Partition swap 2xRAM size
5.
Click New .
a.
For "Mount point,” enter /boot .
b.
Make sure "File System Type:" is set to ext3 .
c.
Under "Allowable Drives,” make sure only your boot device is selected. If
you do not, you may end up with an installation that spans multiple drives.
d.
Set "Size (MB)" to 100 .
e.
Make sure "Additional Size Options" is set to Fixed Size .
73
HP CONFIDENTIAL
Writer: Jimmy Chan File Name: 312977-006.doc
Codename: Condor II Part Number: 312977-006 Last Saved On: 9/10/03 10:05 AM