5.
Wait while system loads the new drivers.
6.
Review the Volume SYS and Partition Properties Screen. Select
Modify
if any
changes are necessary, and press the
F10
key to save any changes.
7.
Select
Continue
after all changes have been applied.
8.
Wait a few minutes while system files are copied and Netware GUI is
started.
PHASE 4 – Configure the Network
The installation proceeds under a graphical interface.
NOTE:
The network settings need to be customized to your environment. Please refer to
Novell NetWare manuals should you need further details on the networking setup fields.
1.
Enter the server name and click
Next
.
2.
Insert the NetWare licensing/cryptographic diskette when prompted and then
click
Next
.
3.
Select Free Space and click
create
. Type in a Volume name and select a Volume
Type for the first the partition. Click
OK
. Click
Next
to proceed.
4.
Choose
YES
, if necessary to mount all volumes when server reboots. Click
Next
to proceed.
5.
Setup your IP or IPX protocols to match your network environment.
NOTE:
NetWare 6. 0 will not proceed if you don't setup an IP address for at least one of
your system network devices (embedded LAN or added PCI card).
6.
You may then configure the
Domain Name Service
. Click
Next
to
proceed.
7.
Select your time zone then click
Next
.
8.
Select whether to create a
New NDS Tree
or use an
Existing NDS Tree
,
and click
Next
.
9.
To create a
New NDS Tree
, enter the
Tree Name
, the
Context for
Server Object
, and the administrator
password
and click
Next
.
64
HP CONFIDENTIAL
Writer: Jimmy Chan File Name: 312977-006.doc
Codename: Condor II Part Number: 312977-006 Last Saved On: 9/10/03 10:05 AM