5.
If you accept erasing all data on your disk, select
Continue
. Then
press any key
for your system to create the partition, reboot, and format that partition.
6.
Press
F10
to "
Accept License Agreement
.”
NOTE:
You can boot from the NetWare SBS 6 License diskette. Novell DOS 7 and all
required DOS utilities (
FDISK
,
FORMAT
,
EDIT
) are included on the diskette.
7.
Change the prompt from
Express
to
Custom
, and keep the default
New
server
option; scroll down and choose
Continue
.
8.
Review the Server Settings. If you do not want the "SERVER" to automatically
load after reboot, Modify the
Load Server at reboot
parameter to NO.
9.
Go to the "Server SET Parameters" and Choose Edit. A window will pop-up and
the following should be added:
i. SET MINIMUM PACKET RECEIVE BUFFERS=2500
ii
. SET MAXIMUM PACKET RECEIVE BUFFERS=12500
10.
Press Esc, save the changes.
11.
Scroll down to select Continue.
12.
Review the regional settings and modify if necessary.
13.
Review the mouse and video settings and modify if necessary.
14.
Wait a few minutes while system files are copied from the CD-ROM.
Phase 2 – Install HP Drivers
1.
The installation program then detects your hardware and attempts to match the
drivers to the hardware.
2.
If you have an IDE only system, press Enter to continue. If you have another
hardware controller, you need to install the appropriate drivers:
a.
Scroll down to
Modify
and press
Enter
.
b.
Scroll down to highlight the "
Storage Adapters
" item and press
Enter
.
c.
The installation program displays the drivers detected. Press
Delete
to
remove the default SCSI driver. The only remaining driver should be the
IDEATA.HAM
driver.
52
HP CONFIDENTIAL
Writer: Jimmy Chan File Name: 312977-006.doc
Codename: Condor II Part Number: 312977-006 Last Saved On: 9/10/03 10:05 AM