NOTE:
It is possible that during the initial reboot of the NetWare 5.1 OS, the GUI mode
may not load properly. This can be resolved by intalling NW5.1 Support Pack 3 or above.
(See “Section 4. Install the Support Pack.”
Section 3. Install the Support Pack
1.
You can get a latest copy of NetWare Consolidated Support Pack (CSP) from
NetWare Website at
http://support.novell.com/tools/csp/.
2.
You can either subscribe to the "Novell Support Connection CD" program or
download CSP files individually. You will need to mount the Novell
Consolidated Support Pack as a NetWare volume.
3.
HP recommends you use NW 5.1 Support Pack 3 or above, which is also
included in the Novell Consolidated Support Pack 5 or above version.
4.
Close the GUI.
NOTE:
If your GUI is not loaded properly, press
Ctrl
plus
Esc
key simultaneously. A
selection screen should come up, and select “system console.”
5.
Insert the NW 5.1 Support Pack CD-ROM.
6.
At the system console prompt enter the command:
load cdrom
7.
Wait for about 15 seconds for the CD to be automatically mounted as a volume.
After it is completely mounted the system should say
"Volume name"
mounted successfully
. Note the
volume name
(example:
CSP8_CD1
)
.
8.
Type
nwconfig
, NetWare Configuration Tool will open.
9.
Scroll down to select "
Product Options
.”
10.
Scroll up to select "
Install a Product Not Listed
.”
11.
Press
F3
and specify the path, including the volume name (for example,
CSP8_CD1:\NW51SPx:\
,
where SSP8_CD1 is the Volume name from step 5
above and x = version of support pack).
48
HP CONFIDENTIAL
Writer: Jimmy Chan File Name: 312977-006.doc
Codename: Condor II Part Number: 312977-006 Last Saved On: 9/10/03 10:05 AM