manualshive.com logo in svg

HP T5135 - Compaq Thin Client, Руководство по устранению неисправностей

Поделиться
Скачать
HP T5135 - Compaq Thin Client Скачать руководство пользователя страница 74

Restoring a Corrupt BIOS

If the BIOS code on the thin client is corrupt (see the section on BIOS Error Messages in Chapter 4,

“Diagnostics and Troubleshooting”), the BIOS must be restored before the thin client will boot to the

operating system. To restore the BIOS on a thin client t5000 Series, you will need the following:

●

An external USB diskette drive connected to the thin client

●

HP Compaq Thin Client t5000 Series System BIOS Softpaq (for the product being restored) on

diskette

NOTE:

A thin client with a corrupt BIOS will only boot from a USB diskette drive.

A To restore a corrupt BIOS, complete the following instructions

1

.

Insert an empty diskette into a diskette drive on a working computer, and navigate to the following

HP Web site: 

http://h18004.www1.hp.com/products/thinclients/software.html

2

.

Select 

Thin Client Software and Drivers

.

3

.

Under 

option 2

, in 

operating system

 select your thin client operating system, and then under

category

 select 

BIOS

.

4

.

Download to your hard drive. The downloaded file is an executable.

5

.

From your hard drive, open the Softpaq, then open the Flash Diskette folder and double-click the .bat

file.

The screen prompts: 

Place Destination disk in drive A: Press any key when you are

ready.

6

.

Be sure you have inserted an empty diskette in drive A: and press any key to copy the software to

the diskette.

7

.

Power off the thin client with the corrupt BIOS.

8

.

Connect the external USB diskette drive to the thin client and insert the newly created Flash diskette

into the diskette drive.

NOTE:

Before powering on the thin client, check to make sure there are no other USB devices

connected to the thin client. If there are, disconnect them.

9

.

Power on the thin client.

10

.

At power on, the BIOS is automatically restored from the diskette.

WARNING!

Do not turn off power or attempt to reboot the thin client during the recovery process.

While this procedure is primarily used to recover systems with corrupt BIOS, it can also be used to

locally update a system BIOS.

68 Appendix 

D

   System BIOS

ENWW

Содержание T5135 - Compaq Thin Client



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды