HP Synergy 480 Gen9, Руководство по техническому обслуживанию и ремонту, Страница: 35 / 71

To replace the component, reverse the removal procedure.
Removing and replacing a mezzanine option
To remove the component:
Procedure
1. Power down the compute module .
2. Remove the compute module.
3. Place the compute module on a flat, level work surface.
4. Remove the access panel.
5. Remove the mezzanine card.
To replace the component, reverse the removal procedure.
Removing and replacing a heatsink blank
To remove the component:
Removing and replacing a mezzanine option 35