Power button board
Table 5-10
Power button board and cable descriptions and part numbers
Description
Spare part number
Power button board
905579-001
Power button board cable
L61392-001
Before removing the power button board, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 23
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
).
4.
Remove the display assembly (see
).
Remove the power button board:
1.
Disconnect the cable from the power button board (1).
2.
Remove the M2.0 × 3.0 screw (2) that secures the power button board to the computer.
3.
Lift the board from the computer (3).
Reverse this procedure to install the power button board.
42
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Содержание Stream 14
Страница 4: ...iv Safety warning notice ...
Страница 8: ...viii ...
Страница 39: ...Reverse this procedure to install the heat sink Component replacement procedures 31 ...