Powering up StoreOnce 3100, 3500 and 5100 Systems
1.
Perform a final check to ensure all cables are connected correctly and securely:
•
Power cable(s)
•
Keyboard and monitor cables
•
Network cable to LAN port 1
•
Network cable to iLO port
•
Optional hardware, StoreOnce 3500 Series and StoreOnce 5100 System
•
Capacity Upgrade Kits, StoreOnce 5100 System only
NOTE:
See
for cabling examples.
2.
Power on the StoreOnce System (the power button is on the front of the unit).
3.
The Power button LED flashes green during the power-on sequence, and the Power button,
System Health and NIC status LEDs all show steady green when the StoreOnce System is
powering up.
NOTE:
If you wish to configure iLO 4, press F9 in the ProLiant POST screen and proceed
as described in
Figure 5 Powering up HPE StoreOnce 3100 System
3
4
1
2
3
4
NIC status LED
2
UID LED
1
Power LED and on/off button
4
System health LED
3
Powering up StoreOnce 3100, 3500 and 5100 Systems
17