HP StorageWorks SDLT 320, Справочное руководство

Страница: 45 / 74

Troubleshooting the SDLT Drive
33 SDLT Tape Drives Reference Guide
After taking the action listed in Table 15, power on the SDLT drive to rerun POST.
Library and Tape Tools
The HP Library and Tape Tool (LTT) is a tape management and diagnostic tool to
help you install and support your HP storage product. In addition to LTT's
diagnostic and troubleshooting ability, it offers useful information about your
products and provides automated firmware update checks from the Internet, with
the ability to retrieve the latest firmware versions.
Complete instructions and download of LTT are available at:
www.hp.com/support/tapetools
The amber indicator is
on.
A drive fault has occurred. Try to unload the cartridge
and re-initialize the drive
by turning the drive power
off and then on again. The
green light will flash. If
re-initializing is successful,
the lights illuminate steadily
again and go off.
Fatal or nonfatal errors
occur for which a
cause cannot be
determined.
The bus termination or
SCSI signal cable
connections might be
incorrect.
Ensure the SCSI bus is
correctly terminated.
(External drives only)
The AC main power
source grounding might
be incorrect.
Plug the SDLT drive into a
grounded AC main power
outlet on the same line
powering the server.
Table 15: Troubleshooting Chart
If Then Action
201412-003.book Page 33 Thursday, October 3, 2002 9:05 AM