HP StorageWorks NAS e7000 v2 Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 70

background image

Beyond Initial Setup

64

NAS e7000 v2 Quick Start Guide

Configuring the Second Node

Note:

For this section, leave the first node on and power up the second node.

Installing Cluster service on the second node requires less time than on the first
node. Setup configures the Cluster service network settings on the second node
based on the configuration of the first node.

Installation of Cluster service on the second node begins exactly as for the first
node. During installation of the second node, the first node must be running.

Follow the same procedures used for installing Cluster service on the first node,
with the following differences:

1. In the Create or Join a Cluster dialog box, select The second or next node

in the cluster, and click Next.

2. Enter the cluster name that was previously created (in this example,

MyCluster), and click Next.

3. Leave Connect to cluster as unchecked. The Cluster Service Configuration

Wizard will automatically supply the name of the user account selected during
the installation of the first node. Always use the same account used when
setting up the first cluster node.

4. Enter the password for the account (if there is one) and click Next.

5. At the next dialog box, click Finish to complete configuration.

6. The Cluster service will start. Click OK.

7. Close Add/Remove Programs.

Verifying Installation

There are several ways to verify a successful installation of Cluster service. Here
is a simple one:

1. Click Start>Programs>Administrative Tools and click Cluster

Administrator.

«
...
62
63
64
65
66
...
»

Содержание StorageWorks NAS e7000 v2







































































Отзывы:

Нет отзывов

Похожие инструкции для StorageWorks NAS e7000 v2

Verizon DSL-2750B

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 4

Бренд: Kaleidescape Страницы: 24

StorTrends 1312-P

Бренд: American Megatrends Страницы: 2

Бренд: IBM Страницы: 142

Бренд: Western Digital Страницы: 12

Ultrastar Serv24 S2122-N24-4

Бренд: HGST Страницы: 36

Бренд: CASARIA Страницы: 13

Бренд: Razer Страницы: 17

Бренд: Topcom Страницы: 16

Бренд: Macpower & Tytech Страницы: 18

Бренд: Teldat Страницы: 47

ProLiant ML110 Gen 10

Бренд: HPE Страницы: 5

Expansion 750GB

Бренд: Seagate Страницы: 1

Бренд: U-Line Страницы: 6

Бренд: ProCurve Страницы: 2

Бренд: Netstor Страницы: 11

Бренд: 3onedata Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды