HP StorageWorks NAS e7000 v2 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 70

background image

Beyond Initial Setup

49

NAS e7000 v2 Quick Start Guide

Modular Array Requirements

■

When connecting to a Modular SAN Array, the FCA2101 firmware must be
flashed to 3.82a1 prior to running the SAN Connection tool.

■

SecurePath (the multipath fiber software for the Modular SAN Array) is
included with the HP StorageWorks NAS device.

■

When connecting to the Modular SAN Array, versions 8.6 and 8.7 of the
firmware are supported.

Virtual Array Requirements

■

If connecting to a Virtual Array, the FCA2101 firmware must be flashed to
3.90a7 prior to running the SAN Connection tool.

■

When connecting to a VA in conjunction with multipath fiber, AutoPath is
required. AutoPath licensing is not included with the HP StorageWorks NAS
device and must be purchased separately. However, the AutoPath software is
included in the HP StorageWorks NAS Device for availability at the time of
installation. Purchase of the license is required.

Disk Array XP Requirements

■

If connecting to a Disk Array XP, the FCA2101 firmware must be flashed to
3.90a7 prior to running this tool.

■

When connecting to a XP in conjunction with multipath fiber, AutoPath is
required. AutoPath licensing is not included with the HP StorageWorks NAS
device and must be purchased separately. However, the AutoPath software is
included in the image for availability at the time of installation. Purchase of
the license is required.

Enterprise Virutal Array Requirements

■

If connecting to an Enterprise Virtual Array, the FCA2101 firmware must be
flashed to 3.82a1 prior to running the SAN Connection tool.

■

SecurePath (the multipath fiber software for the Enterprise Virtual Array) is
included with the HP StorageWorks NAS device.

■

When connecting to the Enterprise Virtual Array, version 2.0 of the VCS is
supported.

«
...
47
48
49
50
51
...
»

Содержание StorageWorks NAS e7000 v2







































































Отзывы:

Нет отзывов

Похожие инструкции для StorageWorks NAS e7000 v2

Бренд: Samsung Страницы: 14

Бренд: Samsung Страницы: 14

Бренд: Samsung Страницы: 4

Бренд: F5 Страницы: 72

Бренд: F-SECURE Страницы: 19

Бренд: Hama Страницы: 10

FlashPen "Piko"

Бренд: Hama Страницы: 8

Tenus FlashPen USB 3.0

Бренд: Hama Страницы: 4

Бренд: Paradyne Страницы: 32

FrameSaver 9783

Бренд: Paradyne Страницы: 28

Бренд: X-Micro Страницы: 74

Link Manager 4010-43

Бренд: Point Six Страницы: 131

RouterBOARD SXT 5HnD

Бренд: MikroTik Страницы: 2

OCTOPUS 5TX-EEC

Бренд: Hirschmann Страницы: 6

Бренд: IBM Страницы: 117

Бренд: IBM Страницы: 44

Vlinx Serial Servers ESP901E

Бренд: B&B Electronics Страницы: 92

System Storage N3150

Бренд: IBM Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды