HP StorageWorks M2402 Скачать руководство пользователя

Страница: 100 / 282

Visual Manager User Interface

Network Storage Router M2402 User Guide

■

Delete Map deletes the current map.

Note:

‘Indexed’, ‘Auto Assigned’, and ‘SCC’ maps cannot be deleted or renamed.

■

Edit/View Host view or change host information.

Viewing and changing Host information is discussed in the following
paragraphs.

■

Edit/View Map view or change map information.

Viewing and changing Map information is discussed in the following
paragraphs.

■

Clone Map makes a copy of the Current map.

Cloning makes it easier to setup new maps with similar information to
previously created maps. The new map must have a unique map ID and name.

Note:

SCC and Auto-Assigned maps cannot be cloned.

Fibre Channel Mapping Tasks

Configuration tasks for Fibre Channel mapping include:

■

Viewing and Changing Fibre Channel Host Information

■

Viewing and Changing Fibre Channel Map Information

Each task is discussed in the following paragraphs.

Viewing and Changing Fibre Channel Host Information

To view or change current host information:

1. In the Mapping Menu screen, select the desired Fibre Channel module and

port.

2. Click Edit/View in the Host section of the screen.

The Fibre Channel Host Name dialog box is displayed. Current host
information is shown at the top of the dialog box.

3. Enter the new settings and then click Modify.

Содержание StorageWorks M2402



























































































































































































































































































Результаты поиска

Содержание StorageWorks M2402

Отзывы:

Похожие инструкции для StorageWorks M2402

Бренды по названию

Популярные бренды

HP StorageWorks M2402, Руководство пользователя

Результаты поиска

Содержание StorageWorks M2402

Отзывы:

Похожие инструкции для StorageWorks M2402

Бренды по названию

Популярные бренды