HP StorageWorks Edge Switch 2/12, Руководство по обслуживанию

Страница: 133 / 176

133 Edge Switch 2/12 Service Manual
A
Event Codes
This appendix lists all three-digit HP StorageWorks Edge Switch 2/12 event codes
and provides detailed information about each code. Event codes are listed in
numerical order and in tabular format.
An event is an occurrence (state change, problem detection, or problem
correction) that requires user attention or that should be reported to a system
administrator or service representative. An event usually indicates a switch
operational state transition, but may also indicate an impending state change
(threshold violation). An event may also provide information only, and not
indicate an operational state change. Event codes are grouped as follows:
• 000 through 199–system events
• 300 through 399–fan events
• 400 through 499–CTP card events
• 500 through 599–port module events
• 800 through 899–thermal
Events are recorded in the event log of the EWS interface or at a simple network
management protocol (SNMP) workstation. An event may also illuminate the
system error (ERR) light-emitting diode (LED) at the switch front panel.