HP StorageWorks DLT VS80 Скачать руководство пользователя страница 72

Страница: 72 / 88

Regulatory compliance notices

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna

•

Increase the separation between the equipment and receiver

•

Connect the equipment into an outlet on a circuit that is different from that to which the receiver

is connected

•

Consult the dealer or an experienced radio or television technician for help

Declaration of conformity for products marked with the FCC Logo, United States only

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.
For questions regarding this FCC declaration, contact us by mail or telephone:

Hewlett-Packard Company

P.O. Box 692000, Mail Stop 510101

Houston

Texas 77269-2000
1-281-514-3333

To identify this product, refer to the part, series, or model number found on the product.

Modifications

The FCC requires the user to be notified that any changes or modifications made to this device that

are not expressly approved by Hewlett-Packard Company may void the user's authority to operate

the equipment.

Cables

When provided, connections to this device must be made with shielded cables with metallic

RFI/EMI connector hoods in order to maintain compliance with FCC Rules and Regulations.

Power cords

WARNING!

This product can ONLY be used with an HP approved power cord for your specific

geographic region. Use of a non-HP approved power cord may result in: 1) not meeting individual

country specific safety requirements; 2) insufficient conductor ampacity that could result in

overheating with potential personal injury and/or property damage; and

3) an unapproved power cord could fracture resulting in the internal contacts being exposed, which

potentially could subject the user to a shock hazard. HP disclaims all liability in the event a non-HP

approved power cord is used.

Содержание StorageWorks DLT VS80

























































































Результаты поиска

Содержание StorageWorks DLT VS80

Отзывы:

Похожие инструкции для StorageWorks DLT VS80

Бренды по названию

Популярные бренды

HP StorageWorks DLT VS80, Руководство пользователя и сервисное руководство

Результаты поиска

Содержание StorageWorks DLT VS80

Отзывы:

Похожие инструкции для StorageWorks DLT VS80

Бренды по названию

Популярные бренды