HP StorageWorks DLT VS 40 Скачать руководство пользователя страница 12

Страница: 12 / 68

About this Guide

DLT VS 40/80 GB Tape Drive Reference Guide

Getting Help

If you still have a question after reading this guide, contact an HP authorized
service provider or access our website:

http://www.hp.com

HP Technical Support

In North America, call technical support at 1-800-652-6672, available 24 hours a
day, 7 days a week.

Note:

For continuous quality improvement, calls may be recorded or monitored.

Outside North America, call technical support at the nearest location. Telephone
numbers for worldwide technical support are listed on the HP website under
support:

http://www.hp.com/support.html

Be sure to have the following information available before calling:

■

Technical support registration number (if applicable)

■

Product serial numbers

■

Product model names and numbers

■

Applicable error messages

■

Operating system type and revision level

■

Detailed, specific questions

HP Storage Website

The HP website has the latest information on this product, as well as the latest
drivers. Access storage at:

http://www.hp.com/support

. From this website, select

the appropriate product or solution.

Содержание StorageWorks DLT VS 40





































































Результаты поиска

Содержание StorageWorks DLT VS 40

Отзывы:

Похожие инструкции для StorageWorks DLT VS 40

Бренды по названию

Популярные бренды

HP StorageWorks DLT VS 40, Справочное руководство

Результаты поиска

Содержание StorageWorks DLT VS 40

Отзывы:

Похожие инструкции для StorageWorks DLT VS 40

Бренды по названию

Популярные бренды