HP StorageWorks D2700 Скачать руководство пользователя страница 65

Страница: 65 / 80

9 Support and other resources

Contacting HP

Before you contact HP

Be sure to have the following information available before you call or contact HP:

•

Technical support registration number (if applicable)

•

Product serial number

•

Product model name and number

•

Product identification number

•

Applicable error message

•

Add-on boards or hardware

•

Third-party hardware or software

•

Operating system type and revision level

HP contact information

For the name of the nearest HP authorized reseller:

•

See the Contact HP worldwide (in English) website:

http://welcome.hp.com/country/us/en/wwcontact.html

For HP technical support:

•

In the United States, for contact options see the Contact HP United States website:

http://welcome.hp.com/country/us/en/contact_us.html

. To contact HP by phone:

• Call 1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day, 7 days

a week. For continuous quality improvement, calls might be recorded or monitored.

• If you have purchased a Care Pack (service upgrade), call 1-800-633-3600. For more inform-

ation about Care Packs, see the HP website:

http://www.hp.com/hps

•

In other locations, see the Contact HP worldwide (in English) website:

http:// welcome.hp.com/country/us/en/wwcontact.html

Subscription service

HP recommends that you register your product at the Subscriber's Choice for Business website:

http://www.hp.com/go/e-updates

After registering, you will receive email notification of product enhancements, new driver versions,
firmware updates, and other product resources.

D2600/D2700 Disk Enclosure User Guide

Содержание StorageWorks D2700

















































































Результаты поиска

Содержание StorageWorks D2700

Отзывы:

Похожие инструкции для StorageWorks D2700

Бренды по названию

Популярные бренды

HP StorageWorks D2700, Руководство пользователя

Результаты поиска

Содержание StorageWorks D2700

Отзывы:

Похожие инструкции для StorageWorks D2700

Бренды по названию

Популярные бренды